Presets
Overview
Section titled “Overview”A Preset combines actions into a sequence you can run with one selection, a global hotkey or an automatic trigger.
Essentials supports up to three Presets. Advanced and Premium, including Advanced Lifetime, allow unlimited Presets. Existing Legacy Free installations retain their one-Preset limit. Individual actions still depend on the device and the license features available to you.
Create a Preset
Section titled “Create a Preset”- Open Settings → Presets and create a Preset.
- Give it a name that describes the result, such as “Evening listening”.
- Choose Add Action and select the device or general action you need.
- Configure the action and add the remaining steps in the order they should run.
- Run it from the main window’s Preset dropdown. Add a hotkey or trigger when the sequence works as intended.
Preset Actions
Section titled “Preset Actions”Actions run in sequence. Most action failures allow the remaining steps to run, with a summary of errors afterward. Wait Until Ready is an exception: if it fails, the remaining actions are skipped.
Power and Timing Actions
Section titled “Power and Timing Actions”| Action | Description |
|---|---|
| Power On | Turn on a device that supports remote power control |
| Standby | Put that device into standby |
| Toggle Power | Reverse its current power state |
| Delay | Wait 1–300 seconds before the next action |
| Wait Until Ready | Wait up to 1–300 seconds for a device to be connected and, if supported, powered on |
Wait Until Ready does not turn the device on. A useful order is Power On → Wait Until Ready → Select Input Source. If the device reports On before a particular input or service is ready, add a short Delay after the wait.
Amplifier Actions
Section titled “Amplifier Actions”| Action | Description |
|---|---|
| Select Amplifier | Switch to a specific amplifier |
| Select Input Source | Switch the amplifier to a specific input source |
| Select Amplifier Preset | Activate a device preset on the amplifier |
| Set Amplifier Volume | Set the amplifier to a target volume level |
| Toggle Mute | Toggle the amplifier’s mute state |
| Mute / Unmute | Request a specific mute state without toggling it or changing the volume level |
| Set Amplifier Sound Control | Set one supported tone control, switch or named option |
Add one Sound Control action per adjustment. To recall Bass and Treble together, add both actions. If needed, put an action that enables tone controls first. See Sound Controls.
Music Player Actions
Section titled “Music Player Actions”| Action | Description |
|---|---|
| Select Music Player | Switch to a specific music player |
| Select Music Player Preset | Activate a device preset on the music player |
| Select Playback Device | Route audio to a specific playback device |
| Start Playback | Start playback on a specific music player |
| Stop Playback | Stop playback on a specific music player |
| Pause Playback | Pause playback on a specific music player |
| Start Playback (Current) | Start playback on the currently selected player |
| Stop Playback (Current) | Stop playback on the currently selected player |
| Pause Playback (Current Player) | Pause whichever player is selected when the action runs |
| Skip to Next Track | Skip to the next track |
| Skip to Previous Track | Go to the previous track |
| Start Playlist | Play a playlist chosen from the player’s browse library when configuring the action |
| Set Music Player Sound Control | Set one supported sound control on a player |
Multiroom Actions
Section titled “Multiroom Actions”Group Devices adds a chosen member to the selected device’s group. Ungroup Devices removes it.
In Add Action, choose the intended leader, then select the Group member in the action settings. Repeat the action for additional members. Devices must support the same grouping technology, such as BluOS Grouping, HEOS Group or MusicCast Link. These actions do not create groups across ecosystems.
Pause, Mute, Unmute, Group and Ungroup require their target devices to be awake. They can be configured while a device is in standby so you can place Power On and Wait Until Ready earlier in the sequence.
Dirac Actions (with Dirac plugin)
Section titled “Dirac Actions (with Dirac plugin)”| Action | Description |
|---|---|
| Select Dirac Preset | Activate a specific Dirac Live room correction preset |
| Set Dirac Enabled | Toggle Dirac Live processing on or off |
These actions require a supported BluOS amplifier and an eligible license. See Dirac Live.
Preset Triggers
Section titled “Preset Triggers”Open Settings → Presets, edit the Preset, and choose Add Trigger. A Preset runs when any one of its triggers matches. Adding several triggers does not require them all to match together.
| Trigger | Category | Description |
|---|---|---|
| Program Startup | General | Executes when HiFi Control starts |
| Program Shutdown | General | Executes when HiFi Control is shutting down |
| Input Source Changed | Amplifier | Executes when a specific amplifier switches to a specific input source |
| Power State Changed | Device | A device turns on or enters standby |
| Playback State Changed | Device | Playback starts or becomes inactive: paused or stopped |
| Playback Inactive for a Duration | Device | Once after 1–1440 minutes of confirmed inactivity |
| Device Connected / Disconnected | Device | An observed device reconnects or loses connection |
| Mute State Changed | Device | A device becomes muted or unmuted |
| Group Joined / Left | Device | A device joins or leaves a multiroom group as leader or member |
| Selected Player / Amplifier Changed | General | The selected player or amplifier changes |
| Scheduled Time | General | The chosen local time on selected weekdays |
| PC Locked / Unlocked / Resumed | General | Windows locks, unlocks or resumes from sleep |
Device triggers are offered where the required capability is available. The new triggers can be added more than once, for example for two daily schedules. Nothing is enabled automatically.
Schedules and Inactivity
Section titled “Schedules and Inactivity”HiFi Control must be running and the PC awake for a schedule to run. Missed times are skipped after startup or sleep; schedules do not wake the PC or run later to catch up.
Inactivity means a connected, awake device is confirmed paused or stopped. Playback, standby, lost contact, an unreadable state or PC sleep resets the timer. The trigger runs once per inactive period.
Device Changes and Repeated Events
Section titled “Device Changes and Repeated Events”The first connection and confirmed state establish a baseline; they do not run a Preset. Repeated reports of the same state are ignored. Monitoring a device does not turn it on or start playback.
Device-triggered Presets do not chain immediately: device changes are ignored while any Preset is executing and for five seconds afterward. This includes external changes during that interval. Windows events and schedules can still queue.
Hotkey Integration
Section titled “Hotkey Integration”Each preset can be assigned a custom global hotkey for one-press execution. Preset hotkeys are dynamically registered with the hotkey system and appear in Settings → Hotkeys.
Error Handling
Section titled “Error Handling”After execution, an error dialog summarises failed actions. Most failures allow the remaining actions to execute. A Wait Until Ready failure stops the sequence, so later actions do not run against a device that is not ready.
Configuration
Section titled “Configuration”Presets are managed in Settings → Presets, where users can:
- Create new presets with a name and sequence of actions
- Edit existing presets
- Delete presets
- Reorder presets
- Assign hotkeys to presets
Quick Access
Section titled “Quick Access”Active presets are accessible from the main window’s preset dropdown, which shows each preset’s name, assigned hotkey, and step count.
Example: Prepare an Evening Setup
Section titled “Example: Prepare an Evening Setup”For a device with remote power and Sound Controls, create a sequence such as:
- Power On.
- Wait Until Ready.
- Select Input Source.
- Set Amplifier Sound Control for Bass.
- Set Amplifier Sound Control for Treble.
Run it manually first. You can then add Scheduled Time for the evenings you want, or assign a global hotkey.
To compare saved sound setups while listening, use Sound A/B Test. Its default Preset mode applies only Sound Control actions.